Manuals

Commissioning, Installation and User Manuals

This page lists Alber commissioning, installation and user manuals. The book revision level is not the product software or hardware version. If more than one book revision appears, select the correct one for your product. Drawings in manuals may be for reference only. Refer to the engineering drawing package included with your system for the latest drawings specific to your system.

BCT-2000 User's Guide
BCT-2000 Software and BCT-128 and BCT-256 User's Guide.

For software version 1.09 or later.

4200-003 Rev 4.1.2

   

BDS-40 Installation Guide
Battery Diagnostic System installation manual with reference drawings.

See your engineering package for latest drawings.

Connection Details, Optional Sensors drawing
BDS-1189-B985 Rev D

4200-045 Rev 6.0
 

BDS-40 Installation Instructions for Open Rack Systems
Battery Diagnostic System installation manual with reference drawings.

See your engineering package for latest drawings.

4200-079 Rev 2.0
 

 

BDS-256XL Combined Reading Installation Guide
BDS-256XL Combined Reading Battery Diagnostic System Installation Instructions manual with drawings.

See your engineering package for latest drawings.

4200-066 Rev 3.03
 

BDS-256XL Discrete Reading Installation Guide
BDS-256XL Discrete Reading Battery Diagnostic System Installation Instructions with drawings.

See your engineering package for latest drawings.

4200-075 Rev 2.03

BDS-256 with Controller Installation Guide
Battery Diagnostic System installation manual with drawings.

See your engineering package for latest drawings.

4200-028 Rev 4.01
 

BDS-256 / DCM-480 Installation Warning
Installation Warning for BDS-256/DCM-480

Cooling Fan Power Instruction

4200-085

 

BDSU-50 Product Description Guide (English)

French  |  Spanish  |  German  Russian

Universal Battery Diagnostic System (BDSU-50) Battery Monitor Description Guide

4200-113 Rev 1.05

BDSU-50 Installation Guide (English)

Chinese  |

For Cabinet and Open Rack Applications

4200-114 Rev 1.05

Battery Xplorer Battery Monitoring System Startup Guide
BDSU-50 System
Battery Monitor Controller (UXCM) and Battery Module (UXBM/50)

4200-093 Rev 1.00

BMDM (Battery Monitor Data Manager) User's Guide
Battery Monitor Data Manager User's Guide

This manual is for the non-SQL version of the BMDM.

4200-004 Rev 6.12

SQL BMDM (Battery Monitor Data Manager) User's Guide
SQL Battery Monitor Data Manager User's Guide

This manual is for the SQL version of the BMDM.

4200-056 Rev 1.13

BMDM Quick Start Cards
Eight quick start cards that describe basic BMDM functions

4200-026 Rev 4.0

Modbus Protocol for MPM-100 and BDS Series Monitors

This manual is for BMDM Software, MPM and BDS with Controller Firmware

4200-080 Rev 7.04

   

BPM User's Guide
BPM Battery Performance Monitor manual with drawings

4200-006 Rev 4.0
 

Modbus Protocol for BPM User's Guide
BPM Battery Performance Monitor manual with drawings

 

BVM-40 User's Guide
BVM-40 Battery Voltage Monitor manual with drawings

4200-043 Rev 2.02
 

   

Cellcorder CRT-400 User's Guide
Describes CRT-400 Cellcorder operation, diagnostics, and calibration.

4200-070 Rev 1.03
 

Cellcorder CRT-400 Quick Start Instructions
A full color, 12 page fold-out sheet that summarizes operation of the Cellcorder CRT-400 Note; Online version has been formatted to print on standard paper. If you desire the fold-out, contact Alber and request document 4200-049.

4200-049 Rev 2.1

Spanish Version

Cellcorder Battery Analysis System User's Guide
Describes CRT and CLC Cellcorder BAS software.

4200-002 Rev 4.01
 

Cellcorder CRT-300 User's Guide
Describes CRT-300 Cellcorder operation, diagnostics, and calibration.

A Calibration Form is available

4200-038 Rev 2.1
 

Cellcorder CRT-400 / CRT-300 / CLC-200 Spike Probe User's Guide
For spike probes used with all Cellcorder models

4200-060 Rev 2.0
 

Cellcorder CRT-300 Quick Start
A full color, 12 page fold-out sheet that summarizes operation of the Cellcorder CRT-300. Note; Online version has been formatted to print on standard paper. If you desire the fold-out, contact Alber and request document 4200-049.

 

 

Cellcorder CRT Previewer User's Guide
Describes the CRT Previewer program.

4200-040 Rev 2
 

Cellcorder CLC-200 User's Guide 
(Older CLC-200 Cellcorder) Describes CLC-200 operation, diagnostics, and calibration.

4200-001 Rev 5.0
The manual below contains extra application notes in the appendices:

4200-001 Rev 5.0
 

Cellcorder CLC-200 Quick Start Sheet 
(Older CLC-200 Cellcorder)

Rev 0799
 

Replacing the Cellcorder Test Lead Clamps
Describes replacement of the test lead clamps for some of the earlier models of the Cellcorder CRT-300.

4200-058 Rev 1.02
 

   

CVR+ Cell Voltage Recorder Quick Start
This quick start is in standard page size, suitable for printing.

 

   

DMA-35 Hydrometer User's Guide
DMA-35 Portable Density Meter manual.

 

   
ELS – Electrolyte Level Sensor User's Guide

 

 

 

 

 

 

 

 

ELS Installation and Product Description guide.

Rev 1.05

   

FD-2000 User's Guide
FD-2000 Battery Fault Detector Manual

Book Rev 1.0
 

   

MLC Monitor Load Control User's Guide
Describes the MLC program for the BDS-256.

4200-020 Rev 2.0
 

   

MPM-100 Installation Guide
Manual with drawings

See your engineering package for latest drawings. For production runs starting July 2002 (MPM/a).

4200-069 Rev 3.0
 

MPM-100 Installation Drawings
Four schematic drawings that describe MPM-100 system installation connections

If printing, select 'Shrink oversized pages to paper size' on the Adobe Acrobat print dialog box. See your engineering package for latest drawings.

Connections J1 J2 J5
Rev Q.
100 Channel Option
Rev P.
Load Connections 1 of 2
Rev X.
Load Connections 2 of 2
Rev X.

 

External Network Interface User's Guide (COBOX)
How to connect the BMDM computer to an MPM or BDS via local network.

4200-018 Rev 1.0
 

UDS-10 External Network Interface User's Guide
How to connect the BMDM computer to an MPM or BDS via local network.

4200-047 Rev 1.0
 

SNMP Network Interface User's Guide
How to use Simple Network Management Protocol (SNMP) to communicate with an MPM or BDS via a telnet interface.

4200-055 Rev 4.0
 

PSC-10 Programmable Smart Charger User's Guide

4200-017 Rev 2.1
 

   

RM-650 Recharge Module User's Guide

4200-035 Rev 3.1
 

   

RT3-100P / 100L Micro-Ohmmeters User's Guide

4200-030 Rev 1.0
 

   

Serial Port Multiplexer User's Guide
For the MPM-100 and BDS Controller

4200-015 Rev 2.0
 

   

SCT-200 User's Guide
SCT-200 Single/Multiple Cell Tester User's Guide

4200-027 Rev 2.2
 

   

SCT-600/SCT-1200 User's Guide
SCT-600/SCT-1200 Single Cell Tester User's Guide

4200-059 Rev. 1.0
 

SCT Recharge Kit User's Guide

4200-074 Rev 1.0
 

 

Universal Xplorer Industrial Monitor (UXIM) Battery Monitor Product Description Guide
This stationary battery monitor is designed for use in industrial and DC powered data centers.

4200-107 Rev 1.06
 

Universal Xplorer Industrial Monitor (UXIM) Battery Monitor Installation Guide

4200-106 Rev 1.05

 

Universal Xplorer Industrial and Telecom Monitors (UXIM) and (UXTM) Battery Monitor Getting Started Guide

4200-108 Rev 1.04
 

Universal Xplorer Industrial and Telecom Monitors (UXIM) and (UXTM) Battery Monitor Calibration Guide

4200-099 Rev 1.03
 

Modbus Protocol for Universal Xplorer Industrial and Telecom Monitors (UXIM) and (UXTM) Battery Monitor Reference Guide

4200-102 Rev 2.23
 

Universal Xplorer Industrial and Telecom Monitor (UXIM) and (UXTM) Battery Monitor Web Interface User's Guide

4200-109 Rev 1.00
 

   

Universal Xplorer Telecom Monitor (UXTM) Battery Monitor Product Description Guide
This stationary battery monitor is designed for use in telecom and DC powered data centers.

4200-096 Rev 1.05
 

Universal Xplorer Telecom Monitor (UXTM) Battery Monitor Installation Guide

4200-097 Rev 1.06