 |
Alber offers a full line of
battery test equipment, stationary battery monitors, battery diagnostic
systems, capacity test systems, resistance testers, hydrometers,
micro-ohmmeters and load banks.
Alber also offers battery training seminars
for battery maintenance and battery testing. Click a photo below
for a product brochure. Brochures and spec sheets for Alber battery
test equipment are also on the Tech Library page.
You
may download a literature
order form, complete it on-screen, and send it to Alber as an
email attachment.
|
|
| Full
Line Brochure |
|
Full
Line Brochure
|
 |
Full
Line Brochure View
a copy of the Alber full line
product brochure,
which will help you select the Alber equipment best suited to you
needs. |
|
| Portable
Test Equipment |
|
<click
photo>
|
|
Cellcorder®
CRT-400 Cell Resistance Tester
New!
CRT-400. Call for Details!
The
Cellcorder CRT-400 takes the same reliable readings as the earlier
CLC-200 and CRT-300 models. The Cellcorder CRT-400 utilizes USB
Flash drive technology, IR (infrared) and optional Bluetooth communication,
and newly designed resistance and voltage test leads. It comes with
a hard shell carrying case, AC charger, and improved data trending
and analysis software. An optional printer is available. |
|
 |
|
DMA-35
Series Digital Storage Battery Hydrometers
These
compact, easy-to-use hydrometers measure density, specific gravity,
and concentration. |
|
 |
|
MLT-12
Momentary Battery Load Tester
This
portable battery tester provides pass/fail status for 12 volt modules.
It features 50 amp continuous load and complete rejection of AC
ripple. |
|
<click
photo> |
|
PSC-10A
Programmable Smart Charger
This
charger provides 2 volt cells with up to 10 amps of charge current.
Output voltage is 2.85VDC maximum. The PSC-10A features polarity
protection, programmable equalization time, and programmable float
charge time. |
|
| |
|
| Continuous
Battery Monitors |
|
<click
photo> |
|
BDS-40
Battery Monitoring and Diagnostic System
The
BDS-40, especially designed and optimized to monitor UPS batteries
in cabinets, continuously monitors all critical battery parameters,
automatically performs periodic resistance tests to verify the operating
integrity of the connected battery, and greatly improves the reliability
of your DC power system. |
|
Product
Description Guide
|
|
BDS-40
Monitor Product Description Guide
General description of the BDS-40 configurations, system component
specifications, and communication option diagrams. See more guides
below.
Book Rev 2.0. 24pp. 12 Jul 2007. File Size: 4.3M |
|
<click
photo
for BDS-256
or click
for
BDS-256XL
Product Page>
|
|
BDS-256
Battery Monitoring and Diagnostic System
The
BDS-256 continuously monitors all critical battery parameters, automatically
performs periodic resistance tests to verify the operating integrity
of the connected battery, and greatly improves the reliability of
your DC power system. Site Survey Form |
|
Product Description Guide |
|
BDS-256XL
Monitor Product Description Guide
General description of the new BDS-256XL configurations, system
component specifications, and communication option diagrams.
Book Rev 2.0. 30pp. 11 Oct 2007. File Size: 1.32M Site Survey Form |
|
<click
photo> |
|
MPM-100
Battery Monitoring and Diagnostic System
The
MPM-100 multi-purpose monitor is a single module solution, containing
data collection, controller, and resistance test circuitry for all
applications of 140 volts or less. |
|
Product
Description Guide
|
|
MPM-100
Monitor Product Description Guide
General description of the MPM-100 configurations, system component
specifications, and communication option diagrams.
Book Rev 2.0. 18pp. 6 Mar 2007. File Size: 1.4M |
|
| |
|
| Capacity
Test Systems |
|
<click
photo> |
|
BCT-2000
Battery Capacity Test System
The
BCT-2000 tests any size string up to 256 cells, performs constant
current capacity and power capacity tests, supports UPS testing
using AC load banks, and supports run-down testing using system
load. |
|
 |
|
Continuous
Load Unit
These
DC load units, which have automatic control and can interface with
the BCT-2000, may be used in both constant power or current applications. |
|
 |
|
SCT-600
/ SCT-1200 Single Cell Test and Charge System
The
SCT test system can discharge and charge one cell at a time. The
test sequence consists of discharging the cell to a selected end
voltage at a programmed load current, then charging to a selected
charge voltage at a programmed current limit for a time determined
by the user. |
|
 |
|
RM-650
Recharge Module
The
RM-650 Recharge Module reconnects your discharged string back to
the bus - fast! |
|
| |
|
| Seminars
and Training |
|
| Seminars
Page
Training
Page |
|
Alber
Seminars and Training
Alber
provides battery seminars and battery training for small or large
groups at your site or ours. Contact Alber for more details. |
