|
Reconnecting a discharged string back to the bus can be time consuming
and expensive. And when done incorrectly, the huge in-rush of current
can create dangerous and destructive arcs. The Alber RM-650 Recharge
Module is the first device that lets you safely reconnect a discharged
string to the power bus so the existing on-line charger can be used
for the recharge.
The RM-650 incorporates
a manual or automatic current limiting circuit to facilitate the
reconnection of the discharged battery string. The unit applies
a resistance across a disconnect switch and limits current to 700
amps. Typical maximum current is 650 amps. When the battery voltage
is close to the bus voltage (within approx. 0.5 volts), the string
can be safely connected back to the bus.
Why
You'll Want the RM-650
With the RM-650,
you don't need to temporarily connect a large and expensive charger
to the discharged string. The RM-650 reduces the risk of high-current
draw when reconnecting a battery to the power bus, and features
easy-to-read indicators for current, voltage, and process status.
The module is protected against overcurrent and overvoltage, and
has front panel terminals for easy voltage and current measurement.
It's AC powered, easy to use in shop or field, and portable, with
wheels for easy moving. No calibration is required.
System
Features
Eliminates
the need for a large and expensive charger to be temporarily connected
to the discharged string.
Reduces
the risk of high-current draw when reconnecting a battery to the
power bus.
Easy-to-read
indicators for current, voltage, and process status.
Protected
against overcurrent and overvoltage.
Front
panel terminals for easy voltage and current measurement.
Automatic
or manual operation, AC powered, portable, and easy to use in shop
or field. Handle
and wheels for easy moving.
No calibration
is required.
Alber.
Still the Battery Test Experts!
The RM-650 is
yet another example of the innovative products created by Alber,
the leading manufacturer of battery test equipment. Contact your
Alber representative today to find out how you can save money by
using the RM-650 Recharge Module to turn a tedious job into a simpler,
safer one!
|