The
new CRT-300 Quick Start
is a large, two sided, full color,
fold out sheet. E-mail
Alber and request document 4200-049.
The
Alber Cellcorder CRT-300 at a Glance
Lightweight,
stylish, rugged and durable. Special features include a memory card,
a graphical reflective LCD display for better contrast, and new
cables and clamps.
Accurate
Data in a Fraction of Normal Test Time
The
Cellcorder cell resistance tester displays and records cell float
voltage, internal cell resistance, and intercell connection resistance.
A compatible hydrometer lets you transfer specific gravity and temperature
data using the IR port.
Use the Cellcorder on a single cell or multicell modules. The memory
card allows virtually unlimited data storage. The IR port or memory
card transfers readings to a PC for analysis and report generation.
The high contrast, 128 x 64 pixel, backlit graphical display shows
menus and test results. A fully charged Cellcorder can test for
seven hours, and isolated operation helps ensure safety and makes
the Cellcorder easy to move around.
System Features
Float Voltage Readings
- The Cellcorder measures the voltage applied during full float
operation. The voltage range covers all cells or modules up to 20
volts, with accuracy to four full digits.
Internal Cell Resistance - Using a patented process,
the Cellcorder applies a momentary load and calculates internal
cell resistance by determining instantaneous voltage drop and load
current. Algorithms make this measurement possible on cells floating
on-line or off-line.
Intercell Resistance - The Cellcorder measures
the resistance between two electrically connected cell terminals.
The measurement consists of connector resistance and contact resistance
at the points of connection to the cell terminals.
Auto Ranging - The Cellcorder automatically selects
the correct voltage range, load resistor, and test time.
Data Extraction and Analysis - After testing, transfer
data to the PC via memory card or IR interface. Trending software
analyzes test data, displays results in graph or tabulated formats,
and saves and prints reports. You may export reports in ASCII, Excel®
or comma-delimited format so other programs can generate customized
reports.
Cellcorder Advantages
Low Cost
- The Alber Cellcorder replaces three instruments that individually
cost more than this one. Significant savings also result from taking
more readings in less time and analyzing data faster.
Multicell Capability -The Cellcorder reads either
single cells or multicell modules.
Reliable Readings - The Cellcorder performs even
in high noise environments - without the need to disconnect the
battery from service. Up to a 60 amp DC load (on 2V cells) is used
to calculate internal cell resistance and intercell resistance.
Circuitry rejects the 50Hz/60Hz ripple often troublesome to AC-based
impedance and conductance meters.
The Cellcorder CRT-300 comes with an 8M memory card, USB memory
card reader, resistance and voltage test leads, carrying case, AC
charger, and data trending and analysis software. An optional printer
is available.
|
